¡ú Supports Wiegand 26, 27, 32, 34, 36 bit card
read format
• password keyboard card readers
• ABA
• biometric authentication
• proximity IC card
¡ú Safety protection
• all input/output has advanced TVS voltage protection
• lightening-surge protection
• short-circuit protection
¡ú DIP Setup: SW 1-7 for controller address setup, SW 8 for hot/cold reset
¡ú 1 standard RS485 communication port, can adds up to 127 controllers,
valid distance: 1200m rate: 9600 1, 1, n
¡ú Capacity and functionalities:
• each controller supports 10,000 cardholders and it can be expanded
to 80,000 cardholders by adding SRAM memory
• each controller can store 4,096 pieces of info about in & out
records or alarm affairs
• supports multi-card checking (max 8 cards)
• supports Anti-Pass Back checking
• programmable password control: card + 4 digit user code; multiple
super codes
• capable of defining multi time schedule control: holidays; temporary
schedules in future one week; each controller can set up 15 time groups
• system board status self-inspect & check: power off, wrong data,
network disorder and case illegal open, etc.
• support remote manual control of output ports
• multiple door status: NO, NC, APB, Safe, Sleep, First card read
open
• powerful inner-board logical control: inter-locking, co-action,
etc.
 |
 |
||||||||||||||||||||
             |
|
||||||||||||||||||||
| |
|||||||||||||||||||||
|
The DCU9010/20, controlling two/four doors, is one important component of AKT® access control system. Each controller can be linked to the others in the system using a "RS-485" communication bus, and a single RS-485 bus can provide for control of up to 508 doors. Each DCU9010/20 controller can operate off-line, making access control decisions independently from work station; the recorded data can be automatically uploaded to centre computer through management software once the computer is on line. The DCU9010/20 has powerful inner-board logical controlling and network co-action functionalities, which best suits high security demanding in bank, prison and military sites. The DCU9010/20 controller can generate various control action based on any activities, for example: when abnormal entry, the controller can be set up to lock related doors and trigger alarm event.Door Control Feature Technical Specifications • Operating power: 12VAC/500mA or 15VDC/500mA• Input parameters: on-off input 0-5V £¬ current<0.3A • Output load : AC ¨Q 14V DC ¨Q 18V , working current ¨Q 5A • Working temperature: -25 ¡æ --55 ¡æ • Working humidity: 20-90% • Reader RJ45 port: 12VDC £¬ current 150mA • C-type lock relay output port: 12VDC (with status LED indicator) • Reader ¨C Controller cable: 8 twisted shielded pair £¬ 24AWG £¬ max. length: 100m • EMS memory: 32K+8K FLASH 128K SRAM • Keeping data without power ¡Ý 150days • Case size: 360 X 280 X 70 mm • Case material: metal
|
|
||||||||||||||||||||
|
|||||||||||||||||||||
| |
|||||||||||||||||||||
|
|
||||||||||||||||||||
 |
|
||||||||||||||||||||
