 |
 |
|||||
             |
|
|||||
| |
||||||
|
The BORIT® DCU9002 series is a mini embedded door controller. Its compact and space-saving design incorporates most components and equipment found in much larger controllers. DCU9002-E encloses an EM card read module and can work without extra card reader; DCU9002-W can connect to a card reader in Wiegand format. It can be linked to a network through RS485 and managed/monitored by centre workstation. It contains all the intelligence and necessary inputs/outputs and can also work without a computer. Small and powerful, it is your ideal choice for installations near a door, within an inter-comm box, or anywhere that requires less than 6X8 cm of spacing. Door Control Feature ¡ú Controls single door¡ú Supports proximity EM/IC card ¡ú Input & output: • 1 standard door status sensor input port • 1 standard door release button input port • lock relay port with NC/NO output to support different lock types ¡ú Safety protection • all input ports have advanced TVS voltage protection • power input ports have short-circuit protection ¡ú 1 standard RS485 communication port; open communication protocol to facilitate system integration ¡ú DIP set up controller address and working status: • SW1-8 to set up controller address and stand for place 0 ¨C 7 accordingly • all SW set to off (address 0) to test status • all SW set to on (address 255) to cold restart ¡ú Capacity and Functionalities: • each controller supports 65,535 cardholders • retains last 3,000 transactions in activity buffer Technical Specifications • Operating power: 7.5 -12VDC/200mA• Input parameters: on-off input 0-5V £¬ current<0.3A • Working temperature: -25 ¡æ --55 ¡æ • Working humidity: 20-90% • Keeping data without power ¡Ý 150days • Size: 68 X 50 X 2 mm
|
|
|||||
|
||||||
| |
||||||
 |
|
|||||
